Skip to main content

Walk Cam · Visual inspection library

Visual inspection checklist, report and examples

A checklist to work from, what a visual inspection report needs, and 52 completed examples where each point is recorded as a short phone clip with a spoken observation.

What is a visual inspection?

A visual inspection is a check of an item, structure or area by looking at it, directly or through a camera, to find and record visible defects such as cracks, corrosion, wear, leaks and missing parts. HSE says a quick visual check before use is enough for many items of work equipment, with a recorded inspection where deterioration could create significant risk. Visual inspection is used alongside other testing, not instead of it: it cannot measure strength, find hidden damage or confirm that something is safe.

Last updated . Facts checked on 16 October 2026 against HSE · Inspection of work equipment (PUWER regulation 6) and TWI · Visual inspection.

Checklist

Visual inspection checklist

A general checklist for recording what can be seen on an item, structure or area. Add the checks from the manufacturer's instructions or your own procedure for the specific equipment. A visual inspection does not test, measure strength or find hidden damage.

Before you start

  • Item or area identified by its ID, location and owner
  • Purpose of the inspection noted (pre-use, routine, after damage, handover)
  • Previous record, manufacturer's instructions or site procedure checked
  • Safe access, permission and enough light to see clearly
  • Parts or areas that cannot be seen or reached written down

Overall condition

  • Whole item or area recorded in context before close-ups
  • Cracks, dents, bending or distortion
  • Wear, abrasion, fraying or loose surfaces
  • Corrosion, rust or coating breakdown
  • Leaks, staining or signs of moisture
  • Missing, loose or damaged parts, fixings or guards
  • Labels, markings and safety signs present and readable
  • Debris, contamination or obstructions
  • Changes since the last record

For each finding

  • Location tied to a fixed reference point
  • What was seen, described as fact rather than cause
  • Photo or video clip reference
  • Rating on your organisation's scale (for example no action, monitor, repair, stop use)
  • Action, owner and due date

Close out

  • Anything unsafe taken out of use and reported
  • Limits of the inspection stated
  • Inspector name, date and signature
  • Next inspection due

Report template

What goes in a visual inspection report

  1. IdentificationWhat was inspected, where, when and by whom, with an asset ID or reference.
  2. Scope and limitsWhy the inspection was done, how (in person, photos or phone video) and which parts could not be seen or reached.
  3. FindingsEach visible defect with its location, a factual description and a photo or clip reference.
  4. RatingA consistent rating for each finding on your organisation's scale, so findings can be compared between visits.
  5. ActionsWhat happens next, who owns it and by when, including anything taken out of use.
  6. Sign-offThe inspector's name, date and signature, and when the next inspection is due.

Every example below includes a completed sample report in this shape, with footage stills next to each finding. Need a written form for a specific job? The form library has inspection checklists by trade.

New · AI Visual Inspector (Beta)

AI fire door inspection, point by point

Film four points of a fire door and the AI boxes each part and suggests pass, fail or check, with an action. The inspector confirms every verdict and the report builds from what they confirmed. A worked example on AI-generated demo footage, from the clips to the finished report. The Kestrel system behind it is in early testing.

Completed examples

Visual inspection examples

Visual inspection FAQs

What is a visual inspection?

A visual inspection is a check of an item, structure or area by looking at it, directly or through a camera, to find and record visible defects such as cracks, corrosion, wear, leaks and missing parts. HSE says a quick visual check before use is enough for many items of work equipment, with a recorded inspection where deterioration could create significant risk. Visual inspection is used alongside other testing, not instead of it: it cannot measure strength, find hidden damage or confirm that something is safe.

What should a visual inspection checklist include?

Identify the item or area and the reason for the check, then look for cracks and distortion, wear, corrosion, leaks, missing or loose parts, unreadable labels and obstructions. For each finding record its location, what was seen, a photo or clip reference, a rating and an action with an owner. Finish by stating what could not be seen, taking anything unsafe out of use and signing the record.

How do you write a visual inspection report?

Start with what was inspected, where, when and by whom. State the scope and the limits, then list each finding with its location, a factual description and the photo or clip that shows it. Give each finding a rating and an action with an owner and due date, and close with the inspector's sign-off and the next inspection date.

Do visual inspections need to be recorded?

For work equipment, HSE says the result of an inspection should be recorded and kept at least until the next inspection of that equipment. It also says records are not normally needed for the simplest pre-use checks. Other regimes, contracts and insurers can set their own recording rules, so check the one that applies.

Who can carry out a visual inspection?

HSE says the person inspecting work equipment needs enough knowledge and experience to know what to look at, what to look for and what to do if they find a problem. Some equipment and structures need a specialist or a formal thorough examination, which a general visual check does not replace.

Can phone video be used for a visual inspection?

Yes, as a record of what was visible and where. A short clip with a spoken observation shows the location and condition more clearly than a photo alone, and can be compared on the next visit. Video cannot measure, test or show hidden damage, so it supports the inspection record rather than replacing a specialist check.

Visual evidence has a clear limit

These guided examples record accessible visible condition. They do not replace specialist examinations, testing, legal records or contractual decisions. Every sample inspection and report is fictional, and the example footage was generated in Google Flow.

Explore the separate form library →