Skip to main content

Form library · Facilities and maintenance

Compressor maintenance checklist

For compressed-air technicians recording a compressor service. Enter the next examination date from the written scheme and the form shows the days left, or a red note once it has passed. Running hours against the maker's service interval, the cooling air clearance measured from a photo, check tallies and defects by priority are worked out as you go. Try the form below, see every question or open a completed example.

Ready to use from the form library, and every question is yours to edit. Try it for a small trial fee, cancel any time.

Try it on your phone

Try it on this phone

Fill in the compressor maintenance visit on your phone now

See how the compressor maintenance visit looks on your phone

Scan the code with your phone camera. It opens the real form, no sign-up needed.

Open the live example and fill it in, just as your team would on site. No sign-up needed.

See it on this phone

Every question is editable. Add this form to your account, then change the wording, add or remove questions and options, and make it fit your own jobs.

Or start your trial with this form ready →

One email, and we won't add you to a mailing list.

Does maintenance replace a pressure-system examination?

HSE distinguishes maintenance from examinations under a written scheme for qualifying pressure systems. Identify the applicable system and examination arrangements; a service visit does not fulfil them by itself.

Last updated . Facts checked by the SiteSurvey team on 6 October 2026 against HSE introduction to pressure equipment and HSE maintenance of work equipment.

Built for servicing air compressors

Record the service at the compressor on a phone. Enter the next examination date from the written scheme and the running hours, measure the clearance at the cooling air grille from a photo, and log defects with a priority: the form works out the days to the examination, how much of the service interval was used and the counts. The interval, minimum clearance and examination date come from the maker's manual and the written scheme; the form sets none, and a service visit does not replace the examination.

Next examination due 13 April 2027, worked out as In date with 195 days until the examination is due

The written scheme examination date

Enter the next examination date from the written scheme or the last examination report. The form shows the days left, flags it within 30 days, and shows a red note once the date has passed, because this visit does not replace the examination.

How calculated fields work →
Running hours now 8041, worked out as 4,029 hours since the last service and 101% of the service interval used, with an amber note that the service is later than the maker's interval

Running hours against the service interval

Enter the interval from the maker's manual and the hours at the last service and now. The form works out the hours run and the share of the interval used, with an amber note when the service is late.

How calculated fields work →
Smallest clearance at the cooling air inlet measured from a photo as 0.09 m, with the marked-up photo kept under the field, against a minimum of 0.5 m from the installation manual: Less than the manual

Clearance at the cooling air grille

Take a photo square on and measure the gap from it, using the cabinet height from the data sheet as the reference. The form compares it with the minimum in the installation manual, so timber stacked against the grille is on the record. It works on web forms in any phone browser today, and the app version is on its way.

How measuring from a photo works →
Counts worked out as 3 defects found: 0 urgent, 2 soon, 1 routine and 1 still open

Defects by priority

Log each defect with where it is, a photo and a priority. The form counts them by priority and shows how many are still open; an open urgent defect shows a red note to record how the compressor was left.

How calculated fields work →

Film the compressor and receiver

Record a short clip round the compressor, dryer and receiver and say what you found. The note is written down for you and kept with the visit.

How Walk Cam works →

A completed compressor maintenance record

A 4,000 hour service of a fictional joinery works compressor: cooler fins blown out after two high-temperature warnings, timber offcuts about 0.09 m from the cooling grille against a 0.5 m minimum, moved with the supervisor, a dryer bypass leak booked for repair and the next written scheme examination 195 days away. Open it as a filled-in form, or switch to a blank copy and try it yourself.

A blue rotary screw compressor in a block-walled room with timber offcuts leaning beside its cooling grille, marked up with the cabinet height as the reference and a short measuring line to the timber
Clearance at the cooling grille · about 0.09 m · minimum 0.5 m
A used air intake filter coated in wood dust beside a new one in its bag on top of the compressor
Air filter replaced at the 4,000 hour service
Compressor cooler fins coated with wood dust
Cooler fins before they were blown out

Try the compressor maintenance visit form live

Answer a few questions and watch it adapt. Your answers are not saved, and any photos you add are deleted within the hour.

Live form: Compressor Maintenance VisitOpen full screen ↗
Fill it in right here

This is the real form as your team would use it: questions appear as you answer, scores work themselves out and you can add photos and signatures. No sign-up needed. Or open a completed example to see every answer, photo and score filled in.

Want to see one filled in? See a completed compressor maintenance visit report (PDF), made by SiteSurvey from a fictional site visit.

Fill it in on a phone or tablet

Your team completes the compressor maintenance visit on site in the SiteSurvey app on iPhone, iPad and Android phones and tablets. The project name and address fill in for them, it works without signal, and it syncs when the device is back online with photos kept against the question they answer.

Customers and subcontractors do not need the app: send them a link and they can fill it in from any browser.

The Compressor Maintenance Visit form in the SiteSurvey app on a tablet
The Compressor Maintenance Visit form in the SiteSurvey app on a phone

Every question in the compressor maintenance visit template

A compressed-air maintenance record with compressor and receiver details, isolation, visible checks, operating readings, service work and handback. 6 sections and 74 questions. Follow-up questions and guidance appear only when an answer calls for them, so the person on site never sees the ones that do not apply.

Make it your own: every question is editable

This is a starting point, not a fixed form. Once it is in your SiteSurvey account you can reword any question, add or remove questions, sections and answer options, and add your own logo, so it fits the way your team works and the jobs you do.

Details you only enter once

Add this form to a project in SiteSurvey and it fills in what the project already knows, so nobody on site retypes it and every form on the job uses the same names. Anything filled in can still be changed.

  • Project: the project name
  • Site or premises address: the site address, from the space or the project
  • Client or organisation: the project's customer

Record details and scope

  • ProjectShort answer

    Filled in from the project in SiteSurvey.

    Fills in from the project name
  • Site or premises addressShort answer
    Fills in from the site address, from the space or the project
  • Client or organisationShort answer
    Fills in from the project's customer
  • Record date*Date
  • Person completing the record*Short answer
  • CheckFor competent compressed-air technicians following manufacturer procedures. This is not a written scheme of examination, pressure test or permission to defeat a protective device.
  • CheckWhere the compressor, receiver and pipework form a pressure system, the Pressure Systems Safety Regulations 2000 apply: regulation 8 requires the user or owner to have a written scheme of examination drawn up or certified by a competent person, and regulation 9 requires examinations by a competent person in line with that scheme. HSE Approved Code of Practice L122 (Safety of pressure systems) explains these duties. Regulation 12 requires the system to be properly maintained. A service visit does not fulfil the examination by itself.

Equipment and scope

  • Compressor ID, model and location*Short answer
  • Scan the data plateScan a label: serial number, model number, asset number

    Optional. Scan the label or data plate to capture the serial and other numbers.

  • Technician competence or authorisation reference*Short answer
  • Manufacturer or approved procedure reference*Short answer
  • Work or inspection scope and exclusions*Notes

System and isolation

  • Receiver and connected system references*Short answer
  • Written scheme and examination references where applicableShort answer

    Reference the applicable examination documentation and distinguish it from this maintenance visit. Record unavailable information as a gap.

  • Next examination due under the written schemeDate

    From the written scheme or the last examination report. Leave it blank if the system has no written scheme.

  • Examination date against this visitWorked out by the form
    Shown when “Next examination due under the written scheme” is answered and “Record date” is answered
  • Days until the examination is dueWorked out by the form
    Shown only when the answers above make it relevant
  • WarningThe examination date in the written scheme has passed. This service visit does not replace the examination. Tell the person responsible for the system (the user or owner) and record what they decided under Use decision.
    Shown when “Examination date against this visit” is “Overdue”
  • Isolation and stored-pressure release verification reference*Short answer
  • Duty pattern and reported alarmsShort answer
  • Service interval in the maker's manual (running hours)Number

    For the service you are doing today, for example 4,000 hours. The form sets none.

  • Running hours at the last serviceNumber
  • Running hours nowNumber
  • Running hours since the last serviceWorked out by the form
    Shown when “Running hours now” is answered and “Running hours at the last service” is answered
  • Share of the service interval used (%)Worked out by the form
    Shown only when the answers above make it relevant
  • CheckThis service is later than the maker's interval. Record why (missed visit, higher duty) and whether the interval or the visit schedule needs changing.
    Shown only when the answers above make it relevant

Service checks

  • Visible pipework, supports and leaks checked*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Lubrication and filters checked to instructions*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Cooling and ventilation paths checked*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Smallest clearance at the cooling air inlet or outlet (m)Number

    Measure from a photo taken square on, using a door or the cabinet height from the data sheet as the reference. It is an estimate; close to the minimum, use a tape.

  • Minimum clearance in the maker's installation manual (m)Number
  • Clearance against the manualWorked out by the form
    Shown when “Smallest clearance at the cooling air inlet or outlet (m)” is answered and “Minimum clearance in the maker's installation manual (m)” is answered
  • CheckLess clearance than the maker asks for. Warm air can recirculate and the compressor can run hot. Record what is in the way and who was told.
    Shown when “Clearance against the manual” is “Less than the manual”
  • Condensate treatment and drains checked to procedure*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Protective-device checks referenced without unauthorised adjustment*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Checks acceptableWorked out by the form
  • Needing actionWorked out by the form
  • Not checkedWorked out by the form
  • Measurement
    Repeat for each measurement. Each one asks:
    • Measurement point and parameter*Short answer
    • Actual result and unit*Short answer
    • Acceptance criterion and source*Short answer
    • Instrument and calibration referenceShort answer
    • Comparison*Choose one
      • Within criterion
      • Outside criterion
      • Unable to assess
    • Exception and response*Notes
      Shown only when the answers above make it relevant
  • Work done, parts and waste handlingNotes
  • Defects found
    Repeat for each defect. Each one asks:
    • Where on the compressor or system*Short answer
    • Defect*Notes
    • Priority*Choose one
      • Urgent: make safe or restrict use now
      • Soon: before the next visit
      • Routine: at the next planned visit
    • Put right on this visit?Yes or No
    • What happens next, and whoNotes
      Shown when “Put right on this visit?” is No
    • Photos of the defectPhotos
  • Defects foundWorked out by the form
  • UrgentWorked out by the form
  • SoonWorked out by the form
  • RoutineWorked out by the form
  • Still openWorked out by the form
  • WarningAn urgent defect is still open. Record under Use decision how the equipment was left (restricted or out of service) and who on site was told before you leave.
    Shown only when the answers above make it relevant

Handover

  • Use decision*Choose one
    • Available within recorded limits
    • Restricted use
    • Out of service
  • Restrictions, isolation and person informed*Notes
    Shown only when the answers above make it relevant
  • Repair or follow-up job referenceShort answer
  • Photos of the equipment as leftPhotos

Actions and review

  • Are further actions required?*Choose one
    • Yes
    • No
  • Further action
    Repeat for each further action. Each one asks:
    Shown when “Are further actions required?” is “Yes”
    • Action and evidence reference*Notes
    • PriorityChoose one
      • Urgent
      • High
      • Medium
      • Low
    • Person responsible*Short answer
    • Target dateDate
    • Action status*Choose one
      • Open
      • In progress
      • Completed
    • Completion evidence*Notes
      Shown when “Action status” is “Completed”
  • Outstanding limitations and information to pass onNotes
  • Record status*Choose one
    • Ready for review
    • Further work needed
    • Work or use stopped
  • Reviewed byShort answer
  • Review dateDate
  • Next service dueDate

    Set by the manufacturer interval in running hours or months, whichever comes first.

  • Days to next serviceWorked out by the form
    Shown when “Record date” is answered and “Next service due” is answered
  • CheckThe next due date is before the date of this record. Check the date entered.
    Shown only when the answers above make it relevant
  • Author signature*Signature
  • CheckSigning records the information entered. It does not itself certify legal compliance, remove a limitation or authorise unsafe work.

Scope and responsibility

For competent compressed-air technicians following manufacturer procedures. This is not a written scheme of examination, pressure test or permission to defeat a protective device.

What a useful entry looks like

Written scheme and examination references where applicable

Reference the applicable examination documentation and distinguish it from this maintenance visit. Record unavailable information as a gap.

Written-scheme reference PS-06 recorded for the relevant system. This visit covers scheduled maintenance; examination findings are held in the separate report.

Fictional example of record wording. Use the actual evidence and approved arrangements for your job; this is not a completed report or an instruction to carry out the work.

See it filled in

A completed compressor maintenance visit report, made by SiteSurvey from a fictional site visit: every answer, the photos, the guidance that applied and the sign-off, ready to send as a PDF.

See completed form (PDF) ↗

Compressor Maintenance Visit FAQs

How should I record “Written scheme and examination references where applicable”?

Reference the applicable examination documentation and distinguish it from this maintenance visit. Record unavailable information as a gap.

Does the form set a safe pressure?

No. Record the system specification and the applicable criterion for each measurement.

Can an air receiver examination be recorded as a service?

Reference the separate examination report. Routine servicing and statutory examination have different purposes.

Does it track the examination date?

If you enter the next examination date from the written scheme, the form shows the days left and a red note once the date has passed, because a service visit does not replace the examination. It sets no interval itself.

What are the limits of this template?

For competent compressed-air technicians following manufacturer procedures. This is not a written scheme of examination, pressure test or permission to defeat a protective device.

Can I complete this form on site and share the record?

In the SiteSurvey app the form works offline, with photos and signatures recorded against the questions. Share the completed record as a PDF or a link. Dates and action owners are recorded fields; this form does not send reminders or update other systems.

Related

Use this compressor maintenance visit form with your team

Add it from the form library in one click, change any question, and every completed form becomes a branded PDF report.

Start your trial →