Skip to main content

Form library · Facilities and maintenance

Boiler service checklist

For appropriately qualified people recording authorised boiler service work. Record equipment and scope, appliance and engineer and service evidence. Try the form below, see every question or open a completed example.

Ready to use from the form library, and every question is yours to edit. Try it for a small trial fee, cancel any time.

Try it on your phone

Try it on this phone

Fill in the gas boiler service record on your phone now

See how the gas boiler service record looks on your phone

Scan the code with your phone camera. It opens the real form, no sign-up needed.

Open the live example and fill it in, just as your team would on site. No sign-up needed.

See it on this phone

Every question is editable. Add this form to your account, then change the wording, add or remove questions and options, and make it fit your own jobs.

Or start your trial with this form ready →

One email, and we won't add you to a mailing list.

Who can work on a gas boiler?

HSE states that work on the gas boiler itself must be done by a Gas Safe registered engineer. The engineer must be competent for the relevant work. Servicing must follow the appliance instructions and applicable safe procedures.

Last updated . Facts checked by the SiteSurvey team on 6 October 2026 against HSE gas work and registered engineers and HSE maintenance of work equipment.

Built for recording a boiler service

For registered gas engineers to record a service on a phone: the checks against the manufacturer's instructions, the readings against their criteria, the work done and what happens next. It sits alongside your own job sheet and records; it does not replace them.

Flue terminal height above ground on a phone: 2.63 m, with a Measure from photo button and the marked-up photo as a thumbnail

Flue terminal height from a photo

Photograph the terminal with the door below it, tap the top and bottom of the door, then the ground and the terminal. The estimate fills the height and the marked-up photo stays with it. Check positions and clearances against the manufacturer's instructions. It works on web forms in any phone browser today, and the app version is on its way.

How measuring from a photo works →
The service record on a phone: checks needing action 1 and checks not carried out 0, worked out

Checks and readings counted

The form counts the checks needing action and the checks not carried out, the measurements recorded and any outside their criterion, which brings up a reminder to record the response and follow the unsafe situations procedure where it applies.

How calculated fields work →

The boiler on camera

Walk Cam records the boiler, the flue and the pipework with your spoken notes, so the condition before and after the service is kept with the job.

How Walk Cam works →

A completed boiler service record

The annual service of a fictional homeowner's combi boiler. A part-blocked condensate trap explained a lockout, the flue terminal height was measured from a photo, and the external condensate pipe is booked to be upsized and insulated before winter.

A pebble-dashed wall with a flue terminal above a white door, marked with a yellow line on the door and a green line from the ground to the terminal, about 2.63 m
Flue terminal · about 2.63 m from a door 1.98 m
A white wall-hung combination boiler in a kitchen cupboard with copper pipes and valves below it
Combi boiler · condensate trap cleaned

Try the gas boiler service record form live

Answer a few questions and watch it adapt. Your answers are not saved, and any photos you add are deleted within the hour.

Live form: Gas Boiler Service RecordOpen full screen ↗
Fill it in right here

This is the real form as your team would use it: questions appear as you answer, scores work themselves out and you can add photos and signatures. No sign-up needed. Or open a completed example to see every answer, photo and score filled in.

Want to see one filled in? See a completed gas boiler service record report (PDF), made by SiteSurvey from a fictional site visit.

For teams

Using the gas boiler service record template for client work?

Paper or a spreadsheet works for the odd job. When your team does this every week, SiteSurvey keeps every visit in one place and turns each one into a report you can send.

  • Everyone fills in the same form on their phone, with photos attached to the answer they belong to.
  • Each visit becomes a branded PDF report for the client, with no retyping.
  • Every site, visit and report is kept together in one account, not scattered across email and shared drives.

Fill it in on a phone or tablet

Your team completes the gas boiler service record on site in the SiteSurvey app on iPhone, iPad and Android phones and tablets. The project name and address fill in for them, it works without signal, and it syncs when the device is back online with photos kept against the question they answer.

Customers and subcontractors do not need the app: send them a link and they can fill it in from any browser.

The Gas Boiler Service Record form in the SiteSurvey app on a tablet
The Gas Boiler Service Record form in the SiteSurvey app on a phone

Every question in the gas boiler service record template

A gas boiler service record with appliance identity, engineer scope, manufacturer checks, measured results, defects, remedial work and customer handover. 6 sections and 56 questions. Follow-up questions and guidance appear only when an answer calls for them, so the person on site never sees the ones that do not apply.

Make it your own: every question is editable

This is a starting point, not a fixed form. Once it is in your SiteSurvey account you can reword any question, add or remove questions, sections and answer options, and add your own logo, so it fits the way your team works and the jobs you do.

Details you only enter once

Add this form to a project in SiteSurvey and it fills in what the project already knows, so nobody on site retypes it and every form on the job uses the same names. Anything filled in can still be changed.

  • Project: the project name
  • Site or premises address: the site address, from the space or the project
  • Client or organisation: the project's customer

Record details and scope

  • ProjectShort answer

    Filled in from the project in SiteSurvey.

    Fills in from the project name
  • Site or premises addressShort answer
    Fills in from the site address, from the space or the project
  • Client or organisationShort answer
    Fills in from the project's customer
  • Record date*Date
  • Person completing the record*Short answer
  • CheckFor appropriately registered gas engineers. This is not a landlord gas safety record, commissioning certificate, industrial steam-boiler examination or DIY servicing guide.
  • CheckThe Gas Safety (Installation and Use) Regulations 1998: regulation 3 says only a competent person, a member of a class of persons approved by HSE (Gas Safe Register), may work on a gas fitting. Regulation 26 says that after work on an appliance the engineer must check the flue, the supply of combustion air, the operating pressure or heat input, and its safe functioning. BS 7967:2015 is the guide for using electronic portable combustion gas analysers to measure combustion performance and carbon monoxide. Servicing must follow the appliance instructions and applicable safe procedures.

Equipment and scope

  • Gas boiler ID, model and location*Short answer
  • Scan the appliance data plateScan a label: serial number, model number, asset number

    Optional. Scan the label or data plate to capture the serial and other numbers.

  • Engineer Gas Safe registration and relevant work categories*Short answer
  • Manufacturer service instructions or approved procedure (with revision)*Short answer
  • Work or inspection scope and exclusions*Notes

Appliance history

  • Gas type (natural gas or LPG)*Short answer
  • Customer-reported symptoms and previous serviceShort answer

Service evidence

Record the instrument, units, operating condition and manufacturer criterion for each measurement. Identify readings or checks outside the visit's scope.

  • Appliance and visible connections checked to instructions*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Flue and combustion-air arrangements checked within scope*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Flue terminal height above ground (m)Number

    An estimate from a photo is fine for this record. Check terminal positions and clearances against the manufacturer's instructions.

  • Photos: flue terminal and surroundingsPhotos
  • Condensate arrangements checked where fitted*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Controls and safety functions checked by approved procedure*Choose one
    • Acceptable
    • Action needed
    • Not checked
    • Not applicable
  • Action, limitation or reason not applicable*Notes
    Shown only when the answers above make it relevant
  • Checks needing actionWorked out by the form
  • Checks not carried outWorked out by the form
  • Measurement
    Repeat for each measurement. Each one asks:
    • Measurement point and parameter*Short answer
    • Actual result and unit*Short answer
    • Acceptance criterion and source*Short answer
    • Instrument and calibration referenceShort answer
    • Comparison*Choose one
      • Within criterion
      • Outside criterion
      • Unable to assess
    • Exception and response*Notes
      Shown only when the answers above make it relevant
  • Measurements recordedWorked out by the form
  • Measurements outside their criterionWorked out by the form
  • WarningA measurement is outside its criterion. Record the response, and follow the manufacturer's instructions and the Gas Industry Unsafe Situations Procedure where it applies.
    Shown only when the answers above make it relevant
  • Unsafe situation found (Gas Industry Unsafe Situations Procedure)Choose one
    • None
    • Immediately Dangerous
    • At Risk
    • Not to Current Standards
  • WarningImmediately Dangerous. Under the Gas Industry Unsafe Situations Procedure, with the responsible person's permission disconnect the appliance from the gas supply, attach a DO NOT USE warning label and give the responsible person a written warning notice. If permission is refused, report it to the gas emergency service.
    Shown when “Unsafe situation found (Gas Industry Unsafe Situations Procedure)” is “Immediately Dangerous”
  • WarningAt Risk. Under the Gas Industry Unsafe Situations Procedure, with the responsible person's permission turn the appliance off, attach a DO NOT USE warning label and give the responsible person a written warning notice.
    Shown when “Unsafe situation found (Gas Industry Unsafe Situations Procedure)” is “At Risk”
  • Warning notice referenceShort answer
    Shown only when the answers above make it relevant
  • Cleaning, parts and adjustments performedNotes

Handover

  • Use decision*Choose one
    • Available within recorded limits
    • Restricted use
    • Out of service
  • Restrictions, isolation and person informed*Notes
    Shown only when the answers above make it relevant
  • Repair or follow-up job referenceShort answer
  • Condition and defect evidencePhotos
  • Customer or responsible person nameShort answer
  • Customer or responsible person signatureSignature

Actions and review

  • Are further actions required?*Choose one
    • Yes
    • No
  • Further action
    Repeat for each further action. Each one asks:
    Shown when “Are further actions required?” is “Yes”
    • Action and evidence reference*Notes
    • PriorityChoose one
      • Urgent
      • High
      • Medium
      • Low
    • Person responsible*Short answer
    • Target dateDate
    • Action status*Choose one
      • Open
      • In progress
      • Completed
    • Completion evidence*Notes
      Shown when “Action status” is “Completed”
  • Actions still openWorked out by the form
    Shown when “Are further actions required?” is “Yes”
  • Outstanding limitations and information to pass onNotes
  • Record status*Choose one
    • Ready for review
    • Further work needed
    • Work or use stopped
  • Reviewed byShort answer
  • Review dateDate
  • Next service dueDate

    Set by the manufacturer's instructions.

  • Days to next dueWorked out by the form
    Shown when “Record date” is answered and “Next service due” is answered
  • CheckThe next service due date is before the record date. Check the date.
    Shown only when the answers above make it relevant
  • Author signature*Signature
  • CheckSigning records the information entered. It does not itself certify legal compliance, remove a limitation or authorise unsafe work.

Scope and responsibility

For appropriately registered gas engineers. This is not a landlord gas safety record, commissioning certificate, industrial steam-boiler examination or DIY servicing guide.

What a useful entry looks like

Measurement

Record the instrument, units, operating condition and manufacturer criterion for each measurement. Identify readings or checks outside the visit's scope.

Measurement recorded against appliance GB-04 and the current service instruction. Instrument reference and operating condition are included with the result.

Fictional example of record wording. Use the actual evidence and approved arrangements for your job; this is not a completed report or an instruction to carry out the work.

See it filled in

A completed gas boiler service record report, made by SiteSurvey from a fictional site visit: every answer, the photos, the guidance that applied and the sign-off, ready to send as a PDF.

See completed form (PDF) ↗

Gas Boiler Service Record FAQs

How should I record “Measurement”?

Record the instrument, units, operating condition and manufacturer criterion for each measurement. Identify readings or checks outside the visit's scope.

Does this include prescribed gas test values?

No. The registered engineer records the required checks, values, units and criteria from the applicable procedure.

Is it a landlord gas safety certificate?

No. Keep the required landlord gas safety record separately; a service record does not replace it.

Can it cover oil or steam boilers?

No. This version is scoped to gas boiler servicing; use an appropriate specialist record for other plant.

What are the limits of this template?

For appropriately registered gas engineers. This is not a landlord gas safety record, commissioning certificate, industrial steam-boiler examination or DIY servicing guide.

Can I complete this form on site and share the record?

In the SiteSurvey app the form works offline, with photos and signatures recorded against the questions. Share the completed record as a PDF or a link. Dates and action owners are recorded fields; this form does not send reminders or update other systems.

Related

Related templates

Chiller maintenance checklist

A chiller maintenance record with equipment details, water circuit and refrigerant observations, operating readings, service work and handback limits.

6 sections · 78 questions · See every question →
Fan coil unit maintenance checklist

A fan coil maintenance record covering unit identity, isolation, filters, coil and condensate observations, controls, service work and handover evidence.

7 sections · 72 questions · See every question →
AHU maintenance checklist

An AHU maintenance record covering filters, fans, belts, coils, dampers, condensate, controls, operating readings and the condition at handback.

6 sections · 81 questions · See every question →
Boiler log and inspection checklist

A boiler room log and inspection for commercial steam and hot water boilers: plant rooms and boilers with data plate scans, a shift log per boiler (pressure, temperature, water level, stack temperature, fuel, blowdown, low water cutoff test, initials) against operating limits you enter, periodic inspection checks, water treatment and combustion readings against your contractors' targets, the US certificate or UK PSSR written scheme and examination, actions and sign-off.

6 sections · 161 questions · See every question →
PPM checklist

Planned maintenance visit: records seen, asset by asset tasks, water temperatures, work done and next visit.

7 sections · 121 questions · See every question →
HVAC maintenance checklist

Service visit record for air conditioning, heat pumps, ventilation and air handling units. Unit by unit checks, refrigerant and F gas leak checks, parts used and sign-off.

6 sections · 99 questions · See every question →

Browse all 428 forms in the library

Use this gas boiler service record form with your team

Add it from the form library in one click, change any question, and every completed form becomes a branded PDF report.

Start your trial →