Skip to main content

Form library · Housing and property

Landlord gas safety record template

A landlord gas safety site record for Gas Safe registered engineers; the engineer does the check and issues the record. Pin the property with GPS, enter the previous check date and the form shows the days since. Add each room and its appliances with the checks, the CO reading and CO/CO₂ ratio, compared only with the limit you enter from the manufacturer's instructions, whether it is safe to use and any defect and remedial action. The form counts the appliances, those at risk or immediately dangerous, and checks the next due date is within 12 months. Try the form below, see every question or open a completed example.

Ready to use from the form library, and every question is yours to edit. Try it for a small trial fee, cancel any time.

Try it on your phone

Try it on this phone

Fill in the landlord gas safety record on your phone now

See how the landlord gas safety record looks on your phone

Scan the code with your phone camera. It opens the real form, no sign-up needed.

Open the live example and fill it in, just as your team would on site. No sign-up needed.

See it on this phone

Every question is editable. Add this form to your account, then change the wording, add or remove questions and options, and make it fit your own jobs.

Or start your trial with this form ready →

One email, and we won't add you to a mailing list.

What must a landlord gas safety record include?

Regulation 36 of the Gas Safety (Installation and Use) Regulations 1998 says the record must include the date of the check, the property address, the landlord's or agent's name and address, a description and location of each appliance or flue, any safety defect, any remedial action, confirmation that the check met the regulations, the engineer's name and signature, and their Gas Safe registration number.

Last updated . Facts checked by the SiteSurvey team on 17 October 2026 against regulation 36 of the Gas Safety (Installation and Use) Regulations 1998, HSE: gas safety check records and what to keep, HSE: gas safety checks, who can do them, HSE: domestic gas FAQs (Gas Industry Unsafe Situations Procedure) and GOV.UK: Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022, guidance for landlords and tenants.

Built for recording a landlord gas safety check

For the Gas Safe registered engineer doing the check. Pin the property, enter the previous check date, then add each room and its appliances with the checks, the CO reading and the CO/CO₂ ratio. The form compares the ratio only with the limit you enter from the manufacturer's instructions; it holds no limits of its own. It counts the appliances, those at risk or immediately dangerous, and checks the next due date. It records the check; only the engineer can decide an appliance is safe.

A gas fire with a CO reading of 96 ppm, a CO/CO₂ ratio of 0.0052, the manufacturer's limit entered as 0.004 and the result Above the limit

Ratio against the manufacturer's limit

Enter the CO reading and the CO/CO₂ ratio from the analyser, and the highest ratio the appliance's instructions allow. The form says whether the reading is within or above that limit and reminds you to follow the instructions and the unsafe situations procedure.

How calculated fields work →
Counts worked out as 2 rooms, 3 appliances checked, 3 landlord's appliances, 2 not safe to use, 0 immediately dangerous, 2 at risk and 1 ratio above the manufacturer's limit

Appliances counted room by room

Each room is a space with its appliances. The form counts the appliances checked and the landlord's, those not safe to use, at risk and immediately dangerous, and readings above the manufacturer's limit, with a red note when anything is immediately dangerous.

How calculated fields work →
Date of the previous gas safety check 13 October 2025 and 361 days since the previous check

Days since the previous check

Enter the previous check from the last record and the form shows the days since, with an amber note past 365 days. It also checks the next due date is within 12 months unless the regulation 36A window applies.

How calculated fields work →
Property location filled in as Front door, 15 Abbey Road with the coordinates, Mark again and View on map

Pin the property

Mark current location at the front door, or by the meter if it is outside. Mark current location works on web forms in any phone browser today, and the app version is on its way.

How GPS location works →

A completed landlord gas safety record

A fictional flat with a combi boiler within its manufacturer's ratio limit, a cooker whose oven flame supervision device failed and a gas fire reading 0.0052 against a 0.0040 limit, both at risk and turned off with the tenant's permission. Open it as a filled-in form, or switch to a blank copy and try it yourself.

A coal-effect gas fire with a brass surround in a tiled fireplace, the canopy above it stained grey
Living room gas fire · ratio above the limit · at risk
A white freestanding gas cooker with a yellow warning label taped to the oven door
Kitchen cooker · flame supervision failed · at risk
A wall-hung combi boiler above a kitchen worktop with its pipework below
Combi boiler · within the manufacturer's limit
A combustion analyser by a combi boiler

Try the landlord gas safety record form live

Answer a few questions and watch it adapt. Your answers are not saved, and any photos you add are deleted within the hour.

Live form: Landlord Gas Safety RecordOpen full screen ↗
Fill it in right here

This is the real form as your team would use it: questions appear as you answer, scores work themselves out and you can add photos and signatures. No sign-up needed. Or open a completed example to see every answer, photo and score filled in.

Want to see one filled in? See a completed landlord gas safety record report (PDF), made by SiteSurvey from a fictional site visit.

Every question in the landlord gas safety record template

A landlord gas safety site record: every appliance and flue room by room with its checks, analyser readings against the manufacturer's limit, defects and remedial action, counts of unsafe appliances, the installation checks, the engineer's Gas Safe number and the details regulation 36 requires. 3 sections and 61 questions. Follow-up questions and guidance appear only when an answer calls for them, so the person on site never sees the ones that do not apply.

Make it your own: every question is editable

This is a starting point, not a fixed form. Once it is in your SiteSurvey account you can reword any question, add or remove questions, sections and answer options, and add your own logo, so it fits the way your team works and the jobs you do.

Details you only enter once

Add this form to a project in SiteSurvey and it fills in what the project already knows, so nobody on site retypes it and every form on the job uses the same names. Anything filled in can still be changed.

  • Project: the project name
  • Client: the project's customer
  • Site: the site, when the form is opened for a space or a product
  • Site address: the site address, from the space or the project

Property and engineer

  • ProjectShort answer
    Fills in from the project name
  • ClientShort answer
    Fills in from the project's customer
  • Site*Short answer
    Fills in from the site, when the form is opened for a space or a product
  • Site address*Short answer
    Fills in from the site address, from the space or the project
  • Property locationShort answer

    Mark it at the front door, or by the meter if it is outside. Tap Mark current location on site. It saves the coordinates, a grid reference and the accuracy.

  • Date of the check*Date
  • Date of the previous gas safety checkDate

    From the last record, if there is one.

  • Days since the previous checkWorked out by the form
    Shown only when the answers above make it relevant
  • CheckMore than 12 months since the previous check. Regulation 36(3) requires checks at intervals of not more than 12 months, and no check may be made late. Under regulation 36A a check made in the 2 months before its deadline is treated as made on the deadline date, so the gap can be up to about 14 months. Enter the deadline from the previous record below to check it.
    Shown only when the answers above make it relevant
  • Deadline for this check (next due date on the previous record)Date

    Optional. Under regulation 36A this can be later than 12 months after the previous check.

  • WarningThis check is after the deadline on the previous record. Regulation 36 does not allow a late check. Record why it was late and make sure every appliance is now in date.
    Shown only when the answers above make it relevant
  • Landlord or agent, name and address*Short answer
  • TenantShort answer
  • Engineer name*Short answer
  • Gas Safe registration number (business)*Short answer
  • Engineer licence numberShort answer
  • GuidanceGas Safety (Installation and Use) Regulations 1998, regulation 36. Landlords must have each appliance and flue checked for safety within 12 months of installation and then at least every 12 months, by a Gas Safe registered engineer. Give a copy of the record to existing tenants within 28 days of the check, and to new tenants before they move in. Keep it until two further checks have been made.
  • CheckThis form records the information regulation 36 requires. Many engineers issue the formal record from their own certification software.

Appliances and flues

  • Rooms
    Repeat for each entry. Each one asks:
    • Room*Short answer
    • Gas appliances in this room
      Repeat for each appliance. Each one asks:
      • Type*Choose one
        • Boiler
        • Gas fire
        • Cooker or hob
        • Water heater
        • Warm air heater
        • Other
      • Make and modelShort answer
      • Scan the data plateScan a label: serial number, model number

        Optional. Scan the label or tag to capture its numbers.

      • Owned by the landlord?Yes or No
      • Flue typeChoose one
        • Room sealed
        • Open flue
        • Flueless
        • Balanced flue
      • Operating pressure or heat inputShort answer

        Or the combustion performance, where it is not reasonably practicable to examine these.

      • Safety devices operate correctlyChoose one
        • Pass
        • Fail
        • Not applicable
      • Ventilation satisfactoryChoose one
        • Yes
        • No
        • Not applicable
      • Flue visual condition satisfactoryChoose one
        • Yes
        • No
        • Not applicable
      • Flue performance test (spillage or flue flow)Choose one
        • Pass
        • Fail
        • Not applicable
      • CO reading (ppm)Number

        As shown by the combustion analyser.

        Shown only when the answers above make it relevant
      • CO/CO₂ ratioNumber
        Shown only when the answers above make it relevant
      • Highest ratio allowed by the manufacturer's instructionsNumber

        Enter the figure from the appliance's instructions. The form does not hold any limits of its own.

        Shown only when the answers above make it relevant
      • Ratio against the manufacturer's limitWorked out by the form
        Shown only when the answers above make it relevant
      • CheckThe ratio is above the limit in the manufacturer's instructions. Follow those instructions and the unsafe situations procedure before the appliance is left in use.
        Shown only when the answers above make it relevant
      • Above the limit (1 = yes)Worked out by the form
      • Other analyser readings or notesShort answer

        For example the flue gas temperature, O₂ or CO₂, or why a reading was not taken.

      • Appliance serviced?Yes or No
      • Safe to use?Yes or No
      • Unsafe situationChoose one
        • At risk
        • Immediately dangerous
        Shown when “Safe to use?” is No
      • WarningUnsafe appliance. Follow the Gas Industry Unsafe Situations Procedure, tell the responsible person, and record the warning label or notice issued.
        Shown when “Safe to use?” is No
      • Safety defect identifiedNotes
        Shown when “Safe to use?” is No
      • Remedial action takenNotes
        Shown when “Safe to use?” is No
      • PhotosPhotos
    • This room: appliances checkedWorked out by the form
    • This room: appliances not safe to useWorked out by the form
    • This room: immediately dangerousWorked out by the form
    • This room: at riskWorked out by the form
    • This room: ratio above the limitWorked out by the form
    • This room: landlord's appliancesWorked out by the form
  • RoomsWorked out by the form
  • Appliances checkedWorked out by the form
  • Landlord's appliancesWorked out by the form
  • Appliances not safe to useWorked out by the form
  • Immediately dangerousWorked out by the form
  • At riskWorked out by the form
  • Ratio above the manufacturer's limitWorked out by the form
  • WarningAn appliance is immediately dangerous. It must not be left connected or in use. Follow the Gas Industry Unsafe Situations Procedure and record the warning notice and who was told.
    Shown only when the answers above make it relevant

Installation

  • Gas tightness testChoose one
    • Pass
    • Fail
    • Not done
  • Emergency control valve accessible?Yes or No
  • Protective equipotential bonding present?Yes or No
  • Carbon monoxide alarm fitted in each room with a fixed combustion appliance (other than a gas cooker), and tested?Yes or No
  • CheckIn England, the Smoke and Carbon Monoxide Alarm (England) Regulations 2015 (as amended in 2022) require landlords to fit a carbon monoxide alarm in any room used as living accommodation that has a fixed combustion appliance, other than a gas cooker.
    Shown when “Carbon monoxide alarm fitted in each room with a fixed combustion appliance (other than a gas cooker), and tested?” is No
  • I confirm the check meets regulation 36(9) of the Gas Safety (Installation and Use) Regulations 1998*Yes or No
  • Next check due byDate

    Normally within 12 months of this check. If this check was done up to 2 months early under regulation 36A, the next is due 12 months from the original deadline.

  • Days from this check to the next due dateWorked out by the form
    Shown only when the answers above make it relevant
  • CheckThe next due date is more than 12 months after this check. That is only right where this check was done in the 2 months before the previous deadline and the deadline date is kept (regulation 36A). Otherwise check the date.
    Shown only when the answers above make it relevant
  • Engineer nameWorked out by the form
  • Engineer signatureSignature
  • Received by (landlord, agent or tenant)Short answer
  • SignatureSignature

See it filled in

A completed landlord gas safety record report, made by SiteSurvey from a fictional site visit: every answer, the photos, the guidance that applied and the sign-off, ready to send as a PDF.

See completed form (PDF) ↗

Landlord gas safety record FAQs

How often do landlords need a gas safety check?

Each gas appliance and flue must be checked within 12 months of being installed and then at intervals of no more than 12 months. For a new tenancy, the check must have been done within the 12 months before it starts. A check done up to 2 months early can keep the original deadline date (regulation 36A). Only a Gas Safe registered engineer can do the check.

When must tenants get a copy?

Give a copy to each existing tenant within 28 days of the check, and to a new tenant before they move in. For lets of 28 days or less, the record can instead be displayed prominently in the property.

How long must the record be kept?

Until there have been two further checks of the appliance or flue, or for 2 years after the last check if the appliance has been removed.

Is this the same as a CP12?

HSE calls it the landlord gas safety record, previously referred to as a gas safety record, certificate or CP12 form. Gas Safe Register does not produce its own form. This form captures every item regulation 36 requires. Many engineers issue the formal record from their own certification software; this is the site record behind it.

What happens if an appliance is unsafe?

Answer that it is not safe to use and the form asks whether it is at risk or immediately dangerous, the categories in the Gas Industry Unsafe Situations Procedure, then the defect and the remedial action, and reminds you to record the warning label or notice issued. Both categories carry a 'Danger Do Not Use' label.

Does it check carbon monoxide alarms?

Yes. In England, private and social landlords must fit a carbon monoxide alarm in any room used as living accommodation that contains a fixed combustion appliance, other than a gas cooker. The form asks whether one is fitted and tested.

Related

Use this landlord gas safety record form with your team

Add it from the form library in one click, change any question, and every completed form becomes a branded PDF report.

Start your trial →