Skip to main content

AI inspector for Walk Cam Now live

Film the point. The AI checks it.You decide.

Record each point of a guided Walk Cam. Seconds later the AI suggests pass, fail or cannot assess, with the defect boxed on a still from your clip. You confirm every point before it reaches the report.

StatusIt is in the SiteSurvey app now, on every account.

PriceIncluded in the subscription. Trial from £1.

Screen recording of the AI inspector on a fire door walk: the Seals point is filmed, the findings sheet suggests Fail with the torn intumescent strip boxed in red, and the inspector accepts it
Suggested: FailYou confirm

How does the AI inspector work on a Walk Cam?

In SiteSurvey, a Walk Cam field on a form can carry an inspector brief: a role, a standard, guidance and checks for each point. When you film a point in a guided walk, the clip is sent to Google Gemini with the brief. Six to ten seconds later the point shows a suggested verdict of pass, fail or cannot assess, each defect boxed on a still from the clip, and a request for a better shot if it could not see enough. You accept, change or dismiss. Only confirmed verdicts and accepted photos go on the form and into the report.

Last updated 25 October 2026.

On the phone

A fire door, point by point.

Recorded on the library Fire Door Inspection form: four Walk Cam points, 18 checks, one door with a torn strip on the hinge jamb and a wedge under it. Every clip is the real app and the real verdict.

Screen recording: the Fire Door Inspection form shows 0 of 4 points recorded and a Record Walk Cam button, then the Walk Cam point card for Point 1 of 4, Door and signage

1. Film the pointHold record, film what the point card asks for, let go. The clip uploads while the next point loads.

Screen recording: the Seals point is filmed along the hinge jamb, then the findings sheet suggests Fail with the torn intumescent strip boxed in red

2. Read the findingsSix to ten seconds later: a suggested verdict, a summary, each defect boxed on a still, and what to film if it wants a better shot.

Screen recording: a door propped open with a wooden wedge is flagged Fail and the inspector taps Accept Fail

3. Accept, change or dismissAccept the verdict, change it to yours, or dismiss a finding you disagree with. Nothing reaches the form until you do.

Screen recording: the form lists all four points with their confirmed verdict chips and the boxed stills saved as photos

4. Back on the formEach point shows its confirmed verdict and the boxed stills, saved as photos. A skipped point says Review AI findings.

6 to 10 secondsPer point. Move on to the next one while it checks.
Asks for a better shotSays exactly what to film, then tap Re-record this point.
Stills saved as photosAccepted findings keep the red box burned into the photo.
Works without signalMarked AI pending, assessed after the walk syncs.

Follow a full AI fire door inspection, with every finding and the finished report →

Three verdicts

Pass needs proof. Fail needs a reason. Unsure means cannot assess.

✓Pass

Every check for the point is met, with clear evidence in the clip.

If any check cannot be seen, it is not a pass.

✕Fail

A check is clearly not met, and the defect is boxed on a still.

From a real testThe intumescent strip on the hinge jamb is torn away. A second door was held open with a wooden wedge.

?Cannot assess

The clip does not show enough to decide, so it says what shot would settle it.

From a real testThe footage only shows a gap gauge under the bottom edge. The gaps at the head and both vertical edges were not recorded.

You decide

Try it: what happens to the suggestion is up to you.

The AI inspector's findings sheet for the seals point: Fail suggested, the torn intumescent strip boxed in red on a still, with Change and Accept Fail buttons

The real findings sheet from a fire door test, October 2026.

The AI suggests Fail on the seals. What do you do?

On the form

Fail Confirmed
The boxed still of the torn strip is saved as a photo on the point.

In the report

Seals: Fail, confirmed by the inspector, with the finding and its boxed photo.

AI-assisted inspection. Verdicts confirmed by the inspector.

Forms with a brief

Three library forms ready to go. Or write your own brief.

A brief is the set of instructions on a Walk Cam field: the role, the standard, house guidance, the rules for pass, fail and cannot assess, and the checks for each point. The AI reads the brief, the point and the clip, and nothing else.

What it will not do

Four limits we built in on purpose.

It is not the competent person

The AI suggests. The inspector decides. The report names the inspector who confirmed each verdict, not the model.

Nothing reaches a report unconfirmed

A skipped point stays marked Review AI findings on the form. The report prints it as not yet confirmed and nothing else.

It says cannot assess rather than guess

Out of shot, too dark, too blurry or no gauge in the gap all come back as cannot assess, with a sentence saying what shot would settle it.

Measurements need a gauge in shot

It reads a gauge or ruler on camera. It never estimates a gap, a length or a distance by eye.

Speed, cost and privacy

New, and honest about it.

We tested it on real fire doors in October 2026. It caught a wedged door, a torn strip and a missing charger, and said cannot assess when a shot was too short, which is what we want. We are rolling it out company by company and reading every result.

Speed
About 6 to 10 seconds per point. Carry on to the next point while it checks.
Cost
Included in the SiteSurvey subscription. No per-clip charge.
Privacy
Clips are sent to Google Gemini for assessment with the brief and the point. They are not used to train Google's models. The app shows a one-off notice before the first assessed walk.
No signal
The point is marked AI pending and the walk carries on. The server assesses the clip after the walk syncs. Nothing is assessed on the phone.
Availability
On every account, in the app now. Add a library form with a brief and start a walk.

Step by step for inspectors and form builders: Use the AI inspector on a Walk Cam.

See it on one door, point by point, to the finished report: AI fire door inspection, worked example.

What comes next

Today it follows UK briefs. Next, Kestrel.

The AI inspector runs on Google Gemini, guided by our UK inspection briefs. Kestrel, our inspection AI with live AR detection and LiDAR measurement, is in early testing, and our own Kestrel models, trained on UK inspection images and tested by certified inspectors, are in development to take over area by area once they prove themselves.

Meet Kestrel →

Try it

Put the AI inspector on your next round.

It is in the SiteSurvey app now, on every account. Add the fire door, communal fire door or ladder form from the library and film the points. Questions? Ask below.

Already a customer?

It is already on for your company. Update the app, add the fire door, communal fire door or ladder form from the library and start a walk.

New to SiteSurvey?

Start a trial from £1, add a fire door form from the library and try the AI inspector on your first walk.

Start your trial →

Included

No per-clip charge. It is part of the SiteSurvey subscription.

Questions about the AI inspector?

The AI inspector is switched on company by company while we read the first results. Included in the subscription.

What would you inspect? (optional)

SiteSurvey AI inspector, at a glance

What it is
An assistant that checks each guided Walk Cam clip against the form's brief and suggests a verdict for the inspector to confirm.
Verdicts
Pass, fail or cannot assess, with a confidence level, a summary, findings boxed on stills and a better shot request when needed.
Who decides
The inspector. Accept, Change, Dismiss and a note on every point. Nothing reaches the report unconfirmed.
The brief
On the Walk Cam field: role, standard, guidance, pass / fail / cannot assess rules and up to 8 checks per point. The fire door, communal fire door and ladder library forms ship with one.
Speed and cost
About 6 to 10 seconds per point. Included in the subscription.
Privacy
Clips go to Google Gemini for assessment. Not used to train Google's models. One-off notice in the app.
Availability
In the SiteSurvey app now, on every account. It runs on Walk Cam fields with a brief, such as the library fire door forms.

Frequently asked questions

AI inspector: common questions.

Browse every FAQ →

What is the Walk Cam AI inspector?

It is an assistant that watches each clip of a guided Walk Cam and suggests a verdict. You film a point and let go. Six to ten seconds later the point shows pass, fail or cannot assess, a short summary, and each defect it found boxed on a still from your clip. You confirm or change the verdict. Nothing reaches the form or the report until you do.

Does the AI decide whether the door passes?

No. The AI suggests. The inspector decides. Every point has Accept and Change buttons, and every finding has Dismiss. The report prints the confirmed verdict and the line AI-assisted inspection, verdicts confirmed by the inspector. The AI is not the competent person and SiteSurvey does not present it as one.

What are the three verdicts?

Pass means every check for the point is met with clear evidence in the clip. Fail means a check is clearly not met, for example a wedge under the door or a torn intumescent strip. Cannot assess means the clip does not show enough to judge: the element is out of shot, the footage is too dark or blurry, or a measurement is needed and no gauge is visible. The AI is told to say cannot assess rather than guess.

What is an inspector brief?

A brief is the set of instructions on a Walk Cam form field. It has a role, such as an experienced UK fire door inspector, the standard to inspect against, house guidance such as never state a measurement you cannot see, the rules for pass, fail and cannot assess, and a list of checks for each point. The AI reads the brief, the point and the clip, and nothing else.

Which forms have a brief?

Three forms in the form library ship with one. The fire door inspection checklist has four Walk Cam points and 18 checks covering the door and signage, the gaps, the seals and hinges, and the closer. Communal fire door checks have their own brief with 17 checks, and the ladder inspection checklist has 19 checks taken from HSE guidance INDG455. For any other form, open the Walk Cam field in the form builder, switch on AI inspector and write the brief and checks yourself.

Can it measure the gap round a fire door?

Only when a gauge or ruler is in the gap on camera. The fire door brief tells the AI to read the gauge and state the number it sees, or to return cannot assess and ask for the gauge shot. It never estimates a gap by eye.

What happens with no signal?

The point is marked AI pending and the walk carries on as normal. Nothing is assessed on the phone. When the walk syncs, the server assesses the clips that were missed and the form shows the findings for you to review the next time it opens. They stay unconfirmed until you confirm them.

Where do my clips go?

Each clip is sent to Google Gemini for assessment, together with the brief and the point. The clips are not used to train Google's models. The first guided walk with a brief shows a one-off notice in the app saying this. Clips are also stored in your SiteSurvey project as every Walk Cam clip is today.

How long does it take and what does it cost?

About six to ten seconds from letting go of the record button to the verdict appearing. You can move on to the next point while it checks. The AI inspector is included in the SiteSurvey subscription. There is no per-clip charge.

When can I use it?

It is in the SiteSurvey app now, on every account. Add the Fire Door Inspection form from the library and it works on your next walk. Included in the subscription.