Skip to main content

AR Floorplans

How do I capture wall elevations using AR?

Inside a space, choose Elevation (Wall), aim at each corner of the wall and tap. SiteSurvey measures door heights, wall drops and mounting positions.

Open the project and the space, tap + and choose Floor Plan (on Android the tile is labelled Elevation). When asked what you are measuring, choose Elevation (Wall).

Aim the centre reticle at each corner of the wall or opening and tap + to drop a point. Each segment shows its length as you go, so you can measure door heights, wall drops and mounting positions that a floor plan does not show. Undo removes the last point.

Tap save and name the measurement. It is saved to the space and syncs to the web dashboard, and it saves to the phone first if you have no signal.

Elevations work on both iPhone and Android. iPhones with a LiDAR scanner give the most accurate measurements.

  1. 1

    Open the space

    Open the project and the space, then tap + and choose Floor Plan (Elevation on Android).

  2. 2

    Choose Elevation (Wall)

    Pick Elevation (Wall) when asked what you are measuring.

  3. 3

    Tap corner to corner

    Aim at each corner of the wall or opening and tap + to drop a point. Lengths appear as you go.

  4. 4

    Save

    Tap save and name the measurement. It is stored with the space.

LM

Answer written by Lee Moss, Director at SiteSurvey.

Put the answer into practice

See how SiteSurvey works for your team.

Start with your own project, forms and spaces. Trial from £1.