Skip to main content

Form library · Health and safety

Machine guarding checklist

For competent people reviewing machine safeguarding arrangements. Record equipment and scope, safeguarding basis and guard records. Try the form below, see every question or open a completed example.

Ready to use from the form library, and every question is yours to edit. Try it for a small trial fee, cancel any time.

Try it on your phone

Try it on this phone

Fill in the machine guarding inspection on your phone now

See how the machine guarding inspection looks on your phone

Scan the code with your phone camera. It opens the real form, no sign-up needed.

Open the live example and fill it in, just as your team would on site. No sign-up needed.

See it on this phone

Every question is editable. Add this form to your account, then change the wording, add or remove questions and options, and make it fit your own jobs.

Or start your trial with this form ready →

One email, and we won't add you to a mailing list.

What does PUWER require for dangerous parts?

HSE PUWER guidance addresses measures to prevent access to dangerous machinery parts or stop their movement before access. Safeguards must be suitable and maintained. Inspection needs competent assessment of the actual machine and tasks.

Last updated . Facts checked by the SiteSurvey team on 6 October 2026 against HSE machinery safety and HSE maintenance of work equipment.

Try the machine guarding inspection form live

Answer a few questions and watch it adapt. Your answers are not saved, and any photos you add are deleted within the hour.

Live form: Machine Guarding InspectionOpen full screen ↗
Fill it in right here

This is the real form as your team would use it: questions appear as you answer, scores work themselves out and you can add photos and signatures. No sign-up needed. Or open a completed example to see every answer, photo and score filled in.

Want to see one filled in? See a completed machine guarding inspection report (PDF), made by SiteSurvey from a fictional site visit.

Fill it in on a phone or tablet

Your team completes the machine guarding inspection on site in the SiteSurvey app on iPhone, iPad and Android phones and tablets. The project name and address fill in for them, it works without signal, and it syncs when the device is back online with photos kept against the question they answer.

Customers and subcontractors do not need the app: send them a link and they can fill it in from any browser.

The Machine Guarding Inspection form in the SiteSurvey app on a tablet
The Machine Guarding Inspection form in the SiteSurvey app on a phone

Every question in the machine guarding inspection template

A machine guarding record covering guard identity, visible condition, approved interlock checks, access risks, defects and restrictions on machine use. 6 sections and 45 questions. Follow-up questions and guidance appear only when an answer calls for them, so the person on site never sees the ones that do not apply.

Make it your own: every question is editable

This is a starting point, not a fixed form. Once it is in your SiteSurvey account you can reword any question, add or remove questions, sections and answer options, and add your own logo, so it fits the way your team works and the jobs you do.

Details you only enter once

Add this form to a project in SiteSurvey and it fills in what the project already knows, so nobody on site retypes it and every form on the job uses the same names. Anything filled in can still be changed.

  • Project: the project name
  • Site or premises address: the site address, from the space or the project
  • Client or organisation: the project's customer

Record details and scope

  • ProjectShort answer

    Filled in from the project in SiteSurvey.

    Fills in from the project name
  • Site or premises addressShort answer
    Fills in from the site address, from the space or the project
  • Client or organisationShort answer
    Fills in from the project's customer
  • Record date*Date
  • Person completing the record*Short answer
  • CheckThis records checks against an approved safeguarding specification. It is not a machinery risk assessment, safety-control validation, conformity declaration or permission to bypass guards.
  • CheckHSE PUWER guidance addresses measures to prevent access to dangerous machinery parts or stop their movement before access. Safeguards must be suitable and maintained. Inspection needs competent assessment of the actual machine and tasks. Sources: The Provision and Use of Work Equipment Regulations 1998 (PUWER), regulation 6 (inspection) and regulation 11 (dangerous parts of machinery); BS EN ISO 14120 (guards: general requirements); and BS EN ISO 13857 (safety distances to prevent hazard zones being reached).

Equipment and scope

  • Machine ID, model and location*Short answer
  • Competent person and authorisation*Short answer
  • Manufacturer or approved procedure reference*Short answer
  • Work or inspection scope and exclusions*Notes

Safeguarding basis

  • Machine risk assessment and guarding specification*Short answer
  • Operating, cleaning, setting and maintenance tasks covered*Notes

    Include the relevant operating, cleaning and maintenance tasks. A guard seen in place does not cover every mode of access.

  • Safe isolation and authorised test procedure*Short answer

Guard records

  • Guard or protective device
    Repeat for each guard or protective device. Each one asks:
    • Guard ID, type and hazard protected*Short answer
    • Fixings, integrity, gaps and access observations*Notes
    • Largest opening or gap in the guard (mm)Number
    • Distance from that opening to the hazard (mm)Number

      Measuring from a photo gives an estimate. Use a tape or laser where the figure matters.

    • Minimum safety distance for that opening, from BS EN ISO 13857 or the guarding specification (mm)Number

      Type the figure from the standard's tables or your specification. It is not worked out here.

    • Distance against the minimumWorked out by the form
      Shown only when the answers above make it relevant
    • WarningThe hazard is closer to the opening than the minimum safety distance. Treat the guard as defective until it is put right.
      Shown only when the answers above make it relevant
    • Approved functional test and actual resultShort answer
    • Outcome*Choose one
      • Meets recorded check
      • Defect or uncertainty
      • Not checked
    • Restriction, isolation and person informed*Notes
      Shown only when the answers above make it relevant
    • Guard evidencePhotos
  • Guards checkedWorked out by the form
  • Meet the checkWorked out by the form
  • Defect or uncertaintyWorked out by the form
  • Not checkedWorked out by the form
  • Below the minimum distanceWorked out by the form

Handover

  • Use decision*Choose one
    • Available within recorded limits
    • Restricted use
    • Out of service
  • Restrictions, isolation and person informed*Notes
    Shown only when the answers above make it relevant
  • Repair or follow-up job referenceShort answer
  • Condition and defect evidencePhotos
  • Next inspection dueDate

    Set by the duty holder, based on the machine, its use and the maker's instructions (PUWER regulation 6).

  • Days to the next inspectionWorked out by the form
    Shown when “Record date” is answered and “Next inspection due” is answered
  • CheckThe next inspection date is before the record date. Check the date.
    Shown only when the answers above make it relevant

Actions and review

  • Are further actions required?*Choose one
    • Yes
    • No
  • Further action
    Repeat for each further action. Each one asks:
    Shown when “Are further actions required?” is “Yes”
    • Action and evidence reference*Notes
    • PriorityChoose one
      • Urgent
      • High
      • Medium
      • Low
    • Person responsible*Short answer
    • Target dateDate
    • Action status*Choose one
      • Open
      • In progress
      • Completed
    • Completion evidence*Notes
      Shown when “Action status” is “Completed”
  • Outstanding limitations and information to pass onNotes
  • Record status*Choose one
    • Ready for review
    • Further work needed
    • Work or use stopped
  • Reviewed byShort answer
  • Review dateDate
  • Author signature*Signature
  • CheckSigning records the information entered. It does not itself certify legal compliance, remove a limitation or authorise unsafe work.

Scope and responsibility

This records checks against an approved safeguarding specification. It is not a machinery risk assessment, safety-control validation, conformity declaration or permission to bypass guards.

What a useful entry looks like

Operating, cleaning, setting and maintenance tasks covered

Include the relevant operating, cleaning and maintenance tasks. A guard seen in place does not cover every mode of access.

Review includes production operation and the recorded cleaning task. Maintenance access is assessed separately under the agreed isolation arrangements.

Fictional example of record wording. Use the actual evidence and approved arrangements for your job; this is not a completed report or an instruction to carry out the work.

See it filled in

A completed machine guarding inspection report, made by SiteSurvey from a fictional site visit: every answer, the photos, the guidance that applied and the sign-off, ready to send as a PDF.

See completed form (PDF) ↗

Machine Guarding Inspection FAQs

How should I record “Operating, cleaning, setting and maintenance tasks covered”?

Include the relevant operating, cleaning and maintenance tasks. A guard seen in place does not cover every mode of access.

Can an interlock be bypassed to test the machine?

This form provides no such permission. Use the approved safe test procedure and competent personnel.

Does an emergency stop replace a guard?

No. Record safeguards against the approved specification; an emergency stop is not a substitute for required guarding.

What if a device cannot be checked safely?

Record it as not checked, document the restriction and refer it for competent review.

What are the limits of this template?

This records checks against an approved safeguarding specification. It is not a machinery risk assessment, safety-control validation, conformity declaration or permission to bypass guards.

Can I complete this form on site and share the record?

In the SiteSurvey app the form works offline, with photos and signatures recorded against the questions. Share the completed record as a PDF or a link. Dates and action owners are recorded fields; this form does not send reminders or update other systems.

Related

Hazards this form covers

Who each hazard harms, what the law expects and the control measures to look for, in our hazard library.

Use this machine guarding inspection form with your team

Add it from the form library in one click, change any question, and every completed form becomes a branded PDF report.

Start your trial →