Skip to main content

Form library · Housing and property

Landlord electrical inspection checklist

A visual electrical check for landlords at a change of tenancy or between EICRs. It is a look for damage, not an EICR: it does not test the installation. Pin the property with GPS and enter the last EICR date and the next inspection date it gives; the form warns if the EICR is over 5 years old and shows the days until the next one is due. Check sockets, lights, the consumer unit, the RCD test button, the intake, flexes, bathroom and outside fittings and the landlord's appliances, and the form counts the checks with a defect. Try the form below, see every question or open a completed example.

Ready to use from the form library, and every question is yours to edit. Try it for a small trial fee, cancel any time.

Try it on your phone

Try it on this phone

Fill in the landlord electrical check on your phone now

See how the landlord electrical check looks on your phone

Scan the code with your phone camera. It opens the real form, no sign-up needed.

Open the live example and fill it in, just as your team would on site. No sign-up needed.

See it on this phone

Every question is editable. Add this form to your account, then change the wording, add or remove questions and options, and make it fit your own jobs.

Or start your trial with this form ready →

One email, and we won't add you to a mailing list.

What electrical checks must landlords do?

In England, the Electrical Safety Standards regulations, which now cover social as well as private landlords, require the electrical installation to be inspected and tested by a qualified person at least every 5 years, or sooner if the report says so. Landlords must give existing tenants a copy of the report within 28 days and new tenants a copy before they move in. GOV.UK guidance also recommends at least a visual inspection before a new tenancy starts. A visual check does not replace an EICR.

Last updated . Facts checked by the SiteSurvey team on 17 October 2026 against GOV.UK: electrical safety standards in the private and social rented sectors, regulation 3 of the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020 and Electrical Safety First: electrical safety in the bathroom.

Built for a landlord's visual electrical check

A look round the property at a change of tenancy or between EICRs, on a phone. It is a visual check, not an EICR: nothing is tested, and anything that looks unsafe goes to a qualified electrician. Pin the property, enter the EICR dates and the form shows the days until the next inspection is due, then go through the sockets, lights, consumer unit, RCD test button, flexes, bathroom and outside fittings, and the form counts the checks with a defect.

Next inspection due 10 February 2028 from the EICR and 498 days until the next inspection is due

Days until the next EICR

Enter the next inspection date the EICR gives and the form shows the days until it is due. It warns within 90 days and when the date has passed, and when the EICR is more than 5 years old. The date comes from the report; the form does not set it.

How calculated fields work →
Counts worked out as 7 checks OK, 2 checks with a defect and 0 not applicable, with an amber note that a visual check cannot tell whether the installation is safe

Checks with a defect counted

Each check is OK, defect or not applicable, and the form counts them. An amber note reminds you that a visual check cannot tell whether the installation is safe inside the walls, so each defect goes to an electrician.

How calculated fields work →
Property location filled in as Front door, 27 Oak Street with the coordinates, Mark again and View on map

Pin the property

Mark current location at the front door, so a portfolio of lets keeps each check with the right home. Mark current location works on web forms in any phone browser today, and the app version is on its way.

How GPS location works →

A completed landlord electrical visual check

A fictional terraced house at a change of tenancy: EICR satisfactory with 498 days to the next inspection, a cracked socket faceplate in bedroom 2 and a cracked outside light with water inside, both sent to an electrician before move-in. Open it as a filled-in form, or switch to a blank copy and try it yourself.

An outdoor bulkhead light on a brick wall with a cracked diffuser and water and dirt inside it
Back door light · cracked, water inside · defect
A white double socket with a crack across its faceplate
Bedroom 2 socket · faceplate cracked · defect
A white consumer unit with its clear cover closed and the circuit breakers visible
Consumer unit · cover on, no damage · OK
Walk Cam recording a damaged outside socket

Try the landlord electrical check form live

Answer a few questions and watch it adapt. Your answers are not saved, and any photos you add are deleted within the hour.

Live form: Landlord Electrical Visual CheckOpen full screen ↗
Fill it in right here

This is the real form as your team would use it: questions appear as you answer, scores work themselves out and you can add photos and signatures. No sign-up needed. Or open a completed example to see every answer, photo and score filled in.

Want to see one filled in? See a completed landlord electrical check report (PDF), made by SiteSurvey from a fictional site visit.

Every question in the landlord electrical check template

A landlord's electrical visual check between EICRs, not an EICR: the last EICR date and code and the days until the next one is due, sockets, switches, lights, consumer unit, RCD test, flexes, bathroom and outside fittings counted, photos and actions. 3 sections and 47 questions. Follow-up questions and guidance appear only when an answer calls for them, so the person on site never sees the ones that do not apply.

Make it your own: every question is editable

This is a starting point, not a fixed form. Once it is in your SiteSurvey account you can reword any question, add or remove questions, sections and answer options, and add your own logo, so it fits the way your team works and the jobs you do.

Details you only enter once

Add this form to a project in SiteSurvey and it fills in what the project already knows, so nobody on site retypes it and every form on the job uses the same names. Anything filled in can still be changed.

  • Project: the project name
  • Client: the project's customer
  • Site: the site, when the form is opened for a space or a product
  • Site address: the site address, from the space or the project

Property

  • ProjectShort answer
    Fills in from the project name
  • ClientShort answer
    Fills in from the project's customer
  • Site*Short answer
    Fills in from the site, when the form is opened for a space or a product
  • Site addressShort answer
    Fills in from the site address, from the space or the project
  • Property locationShort answer

    Mark it at the front door. Tap Mark current location on site. It saves the coordinates, a grid reference and the accuracy.

  • Date*Date
  • Checked by*Short answer
  • ReasonChoose one
    • Change of tenancy
    • Routine check
    • Tenant reported a problem
  • Date of the last EICRDate
  • Days since the EICRWorked out by the form
    Shown when “Date of the last EICR” is answered and “Date” is answered
  • WarningMore than 5 years since the EICR. The Electrical Safety Standards regulations require landlords in England to have the installation inspected and tested by a qualified person at least every 5 years, or sooner if the report says so.
    Shown only when the answers above make it relevant
  • Next inspection due (date given on the EICR)Date
  • WarningThe next inspection date on the EICR has passed. Book an inspection and test.
    Shown only when the answers above make it relevant
  • Days until the next inspection is dueWorked out by the form

    From the date on the EICR, not a date this form sets.

    Shown only when the answers above make it relevant
  • CheckThe next inspection on the EICR is due within 90 days. Book the electrician now so the report is in place before the date.
    Shown only when the answers above make it relevant
  • Last EICR resultChoose one
    • Satisfactory
    • Unsatisfactory, remedial work done
    • Not known
  • Has the tenant been given a copy of the current EICR?Yes or No
  • CheckThe landlord must give a copy of the report to a new tenant before they move in, and to an existing tenant within 28 days of the inspection.
    Shown when “Has the tenant been given a copy of the current EICR?” is No
  • GuidanceA visual check does not replace an EICR. GOV.UK guidance recommends at least a visual inspection before a new tenancy starts, to confirm nothing has been damaged since the last report. Anything that looks unsafe goes to a qualified electrician.
  • GuidanceWales and Scotland. In Wales, The Renting Homes (Fitness for Human Habitation) (Wales) Regulations 2022 require an electrical condition report at least every 5 years. In Scotland, the repairing standard requires an electrical installation condition report at least every 5 years. Check the rules for the nation the property is in.
  • Walk Cam: property walk-roundWalk Cam video with voice-to-text

    Optional. Film a guided walk-through on the SiteSurvey app.

Checks

  • Sockets and switches: no damage, scorch marks or loose fittingsChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “Sockets and switches: no damage, scorch marks or loose fittings” is “Defect”
  • Light fittings and ceiling roses undamagedChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “Light fittings and ceiling roses undamaged” is “Defect”
  • Consumer unit: cover on, no damage, labels legibleChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “Consumer unit: cover on, no damage, labels legible” is “Defect”
  • RCD test button trips and resetsChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “RCD test button trips and resets” is “Defect”
  • Meter and supply intake: no damage or signs of burningChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “Meter and supply intake: no damage or signs of burning” is “Defect”
  • No taped repairs, damaged flexes or overloaded adaptorsChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “No taped repairs, damaged flexes or overloaded adaptors” is “Defect”
  • Bathroom: no sockets within 2.5 m of the bath or shower (shaver sockets excepted), fittings undamagedChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “Bathroom: no sockets within 2.5 m of the bath or shower (shaver sockets excepted), fittings undamaged” is “Defect”
  • Outside lights and sockets undamaged and coveredChoose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “Outside lights and sockets undamaged and covered” is “Defect”
  • Landlord's appliances undamaged (cooker, extractor, heaters)Choose one
    • OK
    • Defect
    • Not applicable
  • What is wrong?Short answer
    Shown when “Landlord's appliances undamaged (cooker, extractor, heaters)” is “Defect”
  • Checks OKWorked out by the form
  • Checks with a defectWorked out by the form
  • Not applicableWorked out by the form
  • CheckAt least one check has a defect. A visual check cannot tell whether the installation is safe inside the walls or the consumer unit. Get a qualified electrician to look at each defect, and add it as an action below.
    Shown only when the answers above make it relevant
  • Photos of any problemsPhotos
  • Is anything dangerous now (exposed live parts, burning smell, scorching)?Yes or No
  • WarningIsolate the circuit if safe to do so and get a qualified electrician straight away.
    Shown when “Is anything dangerous now (exposed live parts, burning smell, scorching)?” is Yes

Actions and sign-off

  • Are further actions needed?Yes or No
  • Further actions
    Repeat for each action. Each one asks:
    Shown when “Are further actions needed?” is Yes
    • What needs doing?*Notes
    • PriorityChoose one
      • Urgent
      • High
      • Medium
      • Low
    • Who will do it?Short answer
    • Due dateDate
    • StatusChoose one
      • Open
      • In progress
      • Completed
  • Inspector nameWorked out by the form
  • Position or companyShort answer
  • Inspector signatureSignature
  • CheckSigning records what was found on the day. It is not an EICR and does not replace an inspection and test by a qualified electrician.

See it filled in

A completed landlord electrical check report, made by SiteSurvey from a fictional site visit: every answer, the photos, the guidance that applied and the sign-off, ready to send as a PDF.

See completed form (PDF) ↗

Landlord electrical check FAQs

What should a visual check look for?

Damaged or scorched sockets and switches, broken light fittings, a damaged consumer unit or intake, taped repairs or damaged flexes, overloaded adaptors, sockets too close to a bath or shower, and damaged outside fittings.

Should I press the RCD test button?

Yes. Pressing it should switch off the power to the circuits the RCD protects, then you reset it. If it does not trip, have a registered electrician check it.

How close can a socket be to a bath or shower?

Electrical Safety First says sockets, other than shaver supply units, are not allowed in a bathroom unless they are at least 2.5 metres from the edge of the bath or shower tray.

Does the form track the EICR?

Yes. Enter the last EICR date and the form warns when it is more than 5 years ago. Enter the next inspection date the EICR gives and the form shows the days until it is due, warns within 90 days and when it has passed, and when the tenant has not had a copy.

Can I photograph problems?

Yes. Dated photos show the condition at each change of tenancy and help the electrician quote.

Who uses this?

Landlords, letting agents, housing associations and inventory clerks.

Related

Hazards this form covers

Who each hazard harms, what the law expects and the control measures to look for, in our hazard library.

Use this landlord electrical check form with your team

Add it from the form library in one click, change any question, and every completed form becomes a branded PDF report.

Start your trial →